Brier · stove
Oven and Range Repair in Brier, WA
Double oven or range not heating in a Brier home? We repair wall ovens, ranges and cooktops, gas and electric.
- Repair cost in writing up front
- LG and Whirlpool authorization
- Open all week, 8 AM–7 PM, Saturday and Sunday included

Five burners, blue flames
Snapshot 1 of 9
A Frigidaire Professional gas cooktop with all five burners lit: short, even blue cones on every port, which is how a healthy burner looks.
The same cooktop with the grates lifted off. The lit burner throws a lopsided flame, a sign to clean the ports and reseat the cap.
A hand runs along the door gasket of an LG washer, feeling for tears and for anything caught in the folds.
A Samsung dryer with steam cycles and a moisture sensor. Long run times on a dryer like this send us to the vent before the heater.
Gray residue and a rust-colored film packed into a washer door boot. That fold holds water, and it is where most front-loader smells begin.
An LG front-loader with the door open and the drum in view. LG is one of the two makers that authorized us, so its warranty repairs come straight to us.
A white top-freezer refrigerator. If the milk below turns warm while the ice cream up top stays hard, the coil up top has usually iced over or its fan has quit.
A Maytag front-load dryer. Maytag comes under our Whirlpool authorization, so its covered repairs run through us as well.
A stainless Kenmore side-by-side with a dispenser on the freezer door, so a water valve and a filter join the list of parts to test.
- Washington appliance repair license
- Authorized LG and Whirlpool service
- EPA 608 Universal technicians
- Sealed systems repaired on site
- Open seven days, 8 to 7
Ranges and ovens in Brier
What we find on oven or range calls in Brier
Double wall ovens are common in Brier's larger kitchens, and one cavity usually fails before the other through a burnt element or a drifting sensor, so we test both while we are there. Power blips during storms can also leave an oven control in an error state that needs a reset or a new board.
On a gas oven, a slow preheat almost always comes from a bake igniter that has aged until it cannot pull the valve open. On electric models the bake or broil element opens up, and a drifting sensor makes every recipe run long. We meter each part, and we leak-test the connections after we touch any gas fitting.

Grates off, one burner lit
1Slow or no bake heat
A weak igniter on gas, a burnt element on electric, or a relay on the board.
2Ticking burners, no flame
Damp or crooked caps, a cracked igniter, or a spark switch stuck on.
3Temperatures off
A drifted sensor, or a control that wants recalibrating.
4Door locked after self-clean
The lock motor or its switch stuck after the cycle.
How it goes
From the first call to a machine that works
- 1
Tell us about it
Call, or fill in the booking card with the machine, its symptoms and your ZIP. Our office rings back to pick an hour that suits you, on any day of the week.
- 2
We test first
The technician checks the outlet or breaker, runs a cycle, and clips a meter onto the parts that match the symptom. Readings, not guesses, decide the diagnosis.
- 3
You approve a written price
You see the repair figure, in ink, before anything comes apart. Go ahead, and the trip charge melts into it; pass, and the trip charge settles it.
- 4
Fixed, with paperwork
Our vans stock the igniters, pumps, valves and fuses that fail most, so plenty of repairs end on visit one. Waiting on an ordered part? The second visit goes on the calendar before we drive off, and your invoice names the warranty period.
Pick a flag
What we fix in Brier
Seven flags on the line, one for each kind of job. Tap one, or let the line run on its own.
Flag 1 of 7
Ranges and ovens
A slow preheat, burners that tick and never light, a dark element.
Brier ranges and ovens page →Questions
Ranges and ovens in Brier: questions
Is Brier part of your regular area?
Yes. Brier sits right between Lynnwood and Mountlake Terrace, and we schedule visits there every day we work.
Oven runs hot or cold: can it be calibrated?
Yes. We compare its reading with a probe thermometer and either adjust the control or fit a new sensor.
Self-clean finished but the door will not open?
Give it time to cool completely, then flip its breaker off for a minute. Still locked? Leave it for us; prying bends the latch.
Gas oven lighting slowly: should I keep using it?
Any smell of gas means off, windows open, and a call to your gas service line. If there is no smell, the usual cause is a tired igniter, which gets replaced and leak-tested.
Oven and Range Repair in Brier, any day
Give us a sentence about the trouble and your street. Our office rings you to agree on an hour and quote the trip charge; the repair figure follows in writing.






